|
Post by mechanicx on Mar 7, 2006 21:59:10 GMT -5
I just saw Verb @ bumppaintball and i told him that i would post this information for you guys... little info for you: when you get your DM, clean and relube the bolt. use slickhoney or dow33 (NOT DOW55). have your lpr at about 1 1/2 to 2 turns out. you should not need more than this. and adjust your FPS through your inline regulator.and replace the battery!!! remove the eye covers and put a small o-ring on top of the eye so that it pushes against the eye cover,(006 oring) this will help align the eyes with the self cleaning insert. after a few cases (brake in period) then you can go lower with the dwell, lpr, and hpr. here is a link that Bump Paintball and I did for PBnation. www.pbnation.com/showthread.php?t=1403217u have any questions just post it. BECAREFULL ON YOUR TRIGGER ADJUSTMENT SCREWS, I ALREADY HAD TO REPAIR 3 OF THEM. (3 DIFFERENT DM6) SOME COME DAMAGED FROM THE FACTORY. SO BE WARNED.i'll add more info here about these guns. laterez This Is Rich AKA MechanicX
|
|
|
Post by sandman512 on Mar 7, 2006 23:04:44 GMT -5
good shit rich. I'look forward to hearing more stuff about the dm.
Rich also told me to check the barrel and reg threads. He said that he has seen a few dm6's that would not take cocker thread barrels and other regs.
|
|
|
Post by Joelr7309 on Mar 8, 2006 1:45:07 GMT -5
yea, i saw my hyper 1 reg not fitting too well... thx Rich
Rich, have you seen the Solinoid go bad on DM6 alot
|
|